We offers vide varieties of investment casting, Customized Engineering Product, Fittings & Valves for Instrumentation, Hydraulic & Pneumatic application used in industries like Oil & Gas, Petrochemicals, Food & Pharma, Chemicals, Automobile, Railways, Marine and other various process industries.

 

Double Ferrule Tube Fittings

We make  manufactures double ferrule compression tube fittings for instrumentations & fluid transmission system to provide torque free & leak  proof joints at all tubing connection & hence prevents costly and hazardous leaks in process& instrumentations tubing .Double ferrule tube fittings consist of four precison engineered components called the body ,nut front ferrule & back ferrule, all manufactured to very stringent tolerance under rigid quality  control procedures.when installed affixed tubing becomes a five-piece connection provide a solid leak proof joint by the sequential action of twin ferrule which is a combinationof metallurgy.

 

 

 

Design

  • Torque free design because of axial movement rather than rotary movement.
  • Self-Aligning
  • Vibration Resistance.
  • Thermal Compatibility & Corrosion Resistance.
  •  Resistance to temperature cycle.
  • Unique combination of Geometry and Metallurgy

 

Performance

  • Work on low as well as high pressure.
  • Work on low as well as high temperature rated for tubes. Work without leakage up to burst point.
  • Seals continuously under make & break condition

 

Tubing selection

For better performance of Our Fittings, the tubing should be reasonably round, free from scratches & draw lines, good surface finish & the ends should be free from burrs. The tubing should be compatible to process fluid, temperature & pressure.Fully annealed seamless tubing in accordance with ASTM A213 & ASTM A269 or equivalent with preferred hardness of 75 - 80 HRB are best suitable for use with Tube Fittings

 

Product Range & Technical Specification

 

                                                         Fractional Seamless Stainless Steel Tubing

 

                                                        Metric Seamless Stainless Steel Tubing

Weld Stainless Steel Tubing  Allowable Working Pressure

To determine the working pressure of weld tubing to the requirements of ASME B31.3 Code,

De-rating factors below must be applied.

For single weld tubing multiply by 0.80 & for double weld tubing multiply by 0.85.

Example: 5S316 seamless 1/2" 0.0. x 0.065" WT allowable working pressure: 4700 psi.

To determine the work pressure of the single weld tubing, multiply 4700 psi by 0.80.

4700 psi x 0.80 = 3760 psi at -20°F to 100°F (-28°C to 37°C)