Omega manufactures double ferrule compression tube fittings for instrumentation & fluid transmission system to provide torque free & leak proof joints at all tubing connection & hence prevents costly and hazardous leaks in process & instrumentation tubing. Omega double ferrule tube fittings consist of four precision engineered components called the body, nut, front ferrule & back ferrule, all manufactured to very stringent tolerances under rigid quality control procedures. When installed affixed to tubing becomes a five-piece connection provide a solid leak proof joint by the sequential action of twin ferrule which is a combination of geometry & metallurgy.

Omega double ferrule tube fittings are easy to install & does not require any special tools. These fittings are used several times with no damage on tube and fittings. We summarize some of the silent feature below.

  Design 

  •  Torque free design because of axial movement rather than rotary movement.
  •  Self-Alignining.
  • Vibration Resistance.
  • Thermal Compatibility & Corrosion Resistance.
  •  Resistance to temperature cycle.
  •  Unique combination of Geometry and Metallurgy.
  •  
  •   Performance
  • Work on low as well as high pressure.
  • Work on low as well as high temperature rated for tubes. Work without leakage up to burst point.
  • Seals continuously under make & break condition
  •  
  • Tubing selection
  • For better performance of Omega Fittings, the tubing should be reasonably round, free from scratches & draw lines, good surface finish & the ends should be free from burrs. The tubing should be compatible to process fluid, temperature & pressure.
  • Fully annealed seamless tubing in accordance with ASTM A213 & ASTM A269 or equivalent with preferred hardness of 75 - 80 HRB are best suitable for use with Omega Tube Fittings.